Ever turned off a tap, only to hear a sudden clunking or banging from your pipes? If so, you’re not alone. Pipes making noise when water is turned off is a common issue for homeowners, and it’s usually down to something called a water hammer. While the sound can be annoying, it can also indicate a bigger problem within your plumbing system. In this blog, we’ll break down why this happens, how to fix it, and when it’s time to call in the pros for more complex solutions like water hammer repair, pipe leak repair, or even a full pipe relining in Sydney.
What Causes Pipes to Make Noise When Water Is Turned Off?
So, what’s behind those noisy pipes? Here are the main culprits:
- 1️⃣. Sudden Change in Water Flow Pressure
When you quickly shut off a tap, the water moving through your pipes has to come to an abrupt stop. This causes a pressure surge, almost like a mini shockwave, making your pipes clatter or bang as the water forcefully hits the closed valve. This is a classic case of water pipe hammering, one of the most common causes of plumbing noise. - 2️⃣. Air Trapped in Pipes
Sometimes, air gets trapped in your plumbing system. This can cause sporadic banging or vibrating noises, especially if the pipes aren’t properly vented or have just had some repair work done. - 3️⃣. Loose or Insecure Pipes
Pipes that aren’t properly secured can rattle or knock against walls or other structures when water pressure suddenly changes. This is a common issue in older homes with aging pipe systems. - 4️⃣. Pipe Design and Material
The type of pipes you have also matters. Metal pipes, like copper, are much more likely to create noise than plastic pipes because they conduct sound more efficiently.
- 1️⃣. Sudden Change in Water Flow Pressure
Why You Shouldn’t Ignore Water Hammer
Ignoring water hammer can lead to more than just annoying noises. Over time, repeated pressure surges can weaken pipe joints, crack pipes, or even cause them to burst. This kind of damage can be costly to repair and may require extensive work if the damage is severe.
Damaged pipes are also more likely to leak, which can lead to costly water damage and higher water bills. Small leaks can be easy to miss, but over time, they can cause significant problems, including mould growth and structural damage.
The shockwaves from a water hammer can also be tough on your appliances. Devices like dishwashers, washing machines, and water heaters can suffer from repeated pressure surges, potentially shortening their lifespan and leading to expensive repairs or replacements.
Additionally, if water is constantly leaking due to damaged pipes, you’ll likely see a noticeable spike in your water bills, adding to your household expenses.
Finally, there’s the risk of mould and mildew. Leaking pipes create the perfect damp environment for these to thrive, which can lead to health issues and costly remediation if left unchecked.
Water Hammer Fix and Pipe Leak Repair Options
If your pipes are making noise, here are a few ways to address it:
- ➤ Install Water Hammer Arrestors
These small devices are designed to absorb the shockwave caused by sudden water stoppages, reducing the pressure surge and associated noise. - ➤Secure Loose Pipes
Use pipe clamps or brackets to secure loose pipes and reduce the potential for rattling and banging. - ➤ Drain the Plumbing System
Removing trapped air can be as simple as draining your entire plumbing system and then refilling it. This can help restore smooth water flow and eliminate those annoying air pockets. - ➤ Reduce Water Pressure
If your home has high water pressure, this can make water hammer problems worse. Installing a pressure regulator can help keep things in check.
- ➤ Install Water Hammer Arrestors
Understanding Pipe Relining Sydney: Costs, Benefits, and Long-Term Savings
The Pipe Relining Cost in Sydney can vary widely, depending on several factors. The length and diameter of the pipe being relined are major considerations, as longer and wider pipes naturally require more material and labour. The condition of your pipes also plays a role – severely damaged or corroded pipes may require more preparation before the relining can begin, potentially increasing the overall cost.
However, while the upfront expense might seem significant, pipe relining is often a smart long-term investment. It not only repairs damaged pipes but also reinforces them, reducing the likelihood of future leaks or water hammer issues. This method essentially creates a new, seamless pipe within the old one, restoring its structural integrity without the need for disruptive excavation or wall demolition.
Additionally, pipe relining can save you money in the long run by preventing costly water damage and avoiding the need for more extensive plumbing repairs later on. For many homeowners, the reduced hassle and long-lasting results make pipe relining a more attractive option than traditional pipe replacement.
If you’re concerned about costs, it’s a good idea to get a detailed quote from a professional, as this will give you a clearer picture of what to expect based on your specific plumbing system.
When to Call a Professional
If you’ve tried the DIY fixes without success, it might be time to call a professional. Persistent water hammer could be a sign of a more serious issue, like a broken pipe or faulty valve, which requires expert attention.
Final Thoughts
Noisy pipes can be a hassle, but with the right approach, you can restore peace to your plumbing system. Whether you need a quick repair, a professional assessment, or a full pipe overhaul, don’t hesitate to take action. It could save you a lot of money and stress down the line.
Need help with noisy pipes? Contact Revolution Pipe Relining at 1300 844 353 or email [email protected] for a free consultation. Let us bring quiet back to your home.